Ring and Bracelet Sizing

A note on Ring Sizes:  Most of our rings can be re-sized UP about one full ring size from the size shown on the web.   Some inlay style rings cannot be re-sized at all, and certain others should not be.  We will do this at $10 per ring, when possible, if you request it when ordering.  If you request a ring to be re-sized that should not be done, we will tell you.  We cannot size any ring down.  If this needs to be done, you may want a local silversmith of your choice to do this.  We have no facilities for this.

If you don’t know your ring size follow these instructions and you will be able to determine it.

#1 – Cut a strip of paper no wider than 1/4″ (or 6 MM).
#2 – Wrap the paper snugly (as you want the ring to fit) around your finger and mark the paper where it meets.
#3 – Measure the marked length of paper and compare it to the chart below.


You now have your ring size. If you feel uncertain of your measurement, we suggest a visit to a local jewelry store, or department store, and ask their jewelry counter personnel to measure it for you!! 
Note: If your knuckle is significantly larger than the base of your finger,
you should measure the knuckle as described above and pick a size
somewhere in between the two.

Ring Size
Paper Length
(in inches)
Paper Length
(in millimeters)

4

1 13/16

46.5

5

1 15/16

49

6

2 1/16

52

7

2 2/16

54.5

8

2 4/16

57

9

2 5/16

59.5

10

2 7/16

62

11

2 9/16

64.5

12

2 10/16

67.5

13

2 12/16

70

14

2 14/16

72.5

15

2 15/16

75

INTERNATIONAL RING SIZE EQUIVALENTS
Canadian
&  U.S.
Inside Diameter
(in millimeters)
United Kingdom Japanese Inside Circumference
(in millimeters)
4
14.8mm
H 1/2
7
46.5mm
4 1/2
15.2mm
I 1/2
8
48mm
5
15.6mm
J 1/2
9
49mm
5 1/2
16mm
L
10
50.5mm
6
16.4mm
M
12
52mm
6 1/2
16.8mm
N
13
53mm
7
17.3mm
O
14
54.5mm
7 1/2
17.7mm
P
15
55.5mm
8
18.1mm
Q
16
57mm
8 1/2
18.5mm
Q 1/2
17
58mm
9
18.9mm
R 1/2
18
59.5mm
9 1/2
19.3mm
S 1/2
20
61mm
10
19.7mm
T 1/2
21
62mm
10 1/2
20.1mm
U 1/2
22
63.5mm
11
20.6mm
V 1/2
24
64.5mm
11 1/2
21mm
W 1/2
25
66mm
12
21.4mm
Y
26
67.5mm
12 1/2
21.8mm
Z
27
68.5mm
13
22.2mm
Z+1
28
70mm
13 1/2
22.6mm
Z+2
29
71mm
14
23mm
Z+3
31
72.5mm
14 1/2
23.4mm
Z+4
32
74mm
15
23.9mm
Z+5
33
75mm

Bracelet Sizes:  Our bracelet sizes are determined by wrapping a flexible tape measure (See Above Photo) inside the bracelet, completely around and across the “gap”.  If the reading on the tape measure shows 6-1/2″, for example, that is the size we assign to it.  If a flexible tape measure is wrapped completely around the wrist, in a comfortable fashion, where the bracelet is to be worn, the reading on the tape should indicate the bracelet size.  Most bracelets can be opened up maybe a 1/4″, or closed down maybe 1/4″ in order to get a good fit.  However, those with Zuni styles with touching, inlaid stones, or similar construction,  cannot be opened or closed in any amount without damage to the stones!